Duration: 5:43
Posted: Apr 7, 2023

Sep 26, 2022 · Sometimes called glazing in-situ is the process of replacing broken glass or missing putty on a historic window without removing the window from ...

Nickel oxide black and green can be used interchangeably, while nickel carbonate should be substituted at one and one-half times the required amount of nickel ...

Duration: 3:05
Posted: Jun 3, 2018

Be very careful when removing old snap glaze. I recommend using a hair dryer or heat gun to loosen it up, but make sure it's not too hot as it could also ...

Aug 23, 2023 · All in all I'd say it's taking around 90-120 minutes per glass pane, two panes per sash. Does that seem right? Just ...

Nov 18, 2014 · First, getting the old stuff off was a real pain at first. What worked best was using a strip of heat tape (the kind used for bending acrylic ...

Use a caulking gun and squeeze a thin layer of window glazing compound in the primed grooves. With the help of a friend, set the new window glass in place.

Nov 23, 2020 · Glazes can be made by mixing paint or ink with Lahmian medium or liquitex acrylic medium.

Feb 10, 2021 · IN all my years, the best I found is a broken concrete bit and a hammer drill.Takes it right out. Just make sure to keep it at the base of the ...